Fully Adjustable Blind Spot Mirrors
These mirrors are made of quality material and are both simple and takes only minutes to install. These mirrors allows the instructor a better view to both sides and the rear of the vehicle, from the passenger seat. They are ideal to see whats happening behind the driver side of the vehicle/ road. Specifically designed for the driving instructor these mirrors allow a large view to the rear/side of the vehicle from the passenger seat.
Easy'n'Quick Fitting Instructions:
You will need a Philips Screwdriver and a small spanner (supplied). Undo the screw on the back of the casing and remove the mirror. Undo the small bolts with supplied spanner until there is enough room for the plastic lip to fit around the top of the plastic casing of your existing wing mirror. Make sure there is one rubber pad to the top and bottom of the lip and that it is a tight fit. If you have a thick plastic casing around your wing mirror you may not need the rubber pads. When in place tighten the bolts until they hold independently and there is no movement. When happy with the position screw the mirror back in to the case and adjust accordingly.
Note: This mirror may not be suitable for all vehicles, as some models have a particularly large mirror glass and close to mirror housing, please check the exterior mirror housing for clearance between the mirror glass and housing.
To check if your mirror is suitable, place a piece of cardboard between glass and housing (please see image) and adjust mirror, if you can adjust the mirror, your vehicle is suitable..
Easy'n'Quick Fitting Instructions:
You will need a Philips Screwdriver and a small spanner (supplied). Undo the screw on the back of the casing and remove the mirror. Undo the small bolts with supplied spanner until there is enough room for the plastic lip to fit around the top of the plastic casing of your existing wing mirror. Make sure there is one rubber pad to the top and bottom of the lip and that it is a tight fit. If you have a thick plastic casing around your wing mirror you may not need the rubber pads. When in place tighten the bolts until they hold independently and there is no movement. When happy with the position screw the mirror back in to the case and adjust accordingly.
Note: This mirror may not be suitable for all vehicles, as some models have a particularly large mirror glass and close to mirror housing, please check the exterior mirror housing for clearance between the mirror glass and housing.
To check if your mirror is suitable, place a piece of cardboard between glass and housing (please see image) and adjust mirror, if you can adjust the mirror, your vehicle is suitable..